Brocade EZSwitchSetup Administrator's Guide - Supporting Fabric OS v5.3.0 and Brocade 200E, 3250, 4100, 4900, 5000 (53-1000441-01, June 2007)

EZSwitchSetup Administrator’s Guide 39
53-1000441-01
Managing Devices
3
This section provides instructions for validating and modifying the zoning configuration and
restoring zoning to the factory default (Typical zoning) setting.
Device accessibility depends on how zoning is set up on the switch. Zoning enables you to partition
your storage area network (SAN) into logical groups of devices that can access each other.
For more specific information about zoning concepts, see the Fabric OS Administrator’s Guide.
To view the zone view
1. Click View under Zoning in the task panel.
The zone view displays (shown in Figure 37), indicating which HBAs can access which storage
devices. The HBA and storage device names displayed in the matrix are the alias names of the
devices (see “Assigning Device Aliases” on page 37 for additional information).
FIGURE 37 Zoning Page (Zone Access Map)