Brocade EZSwitchSetup Administrator's Guide - Supporting Fabric OS v5.3.0 and Brocade 200E, 3250, 4100, 4900, 5000 (53-1000441-01, June 2007)

42 EZSwitchSetup Administrator’s Guide
53-1000441-01
Accessing Web Tools for Advanced Management
3
To validate the zoning configuration and remove offline devices
1. Click Validate under Zoning in the task panel.
The Validate Zoning wizard launches.
2. Follow the instructions in the wizard.
3. Note any devices that are not zoned properly and, after exiting the wizard, click Edit to update
the zone configuration.
RESTORING TYPICAL ZONING
If you have modified your zoning configuration and want to reset the configuration back to the
default Typical zoning configuration, use the following procedure:
To restore Typical zoning
1. Click Restore Default Typical Zoning under Zoning in the task panel
2. Click Yes in the confirmation window.
When this task is complete, the matrix in the Zoning page is automatically updated to reflect
the changes.
Accessing Web Tools for Advanced Management
From the Switch Manager, you can launch Web Tools, which provides more extensive switch
management functions for more experienced users. See the Web Tools Administrator’s Guide for
information on the Web Tools interface.
To launch Web Tools, ensure that you have completed all Switch Manager tasks and then click
Advanced Management in the Miscellaneous category of the task panel. The Switch Manager
session will be closed. Any editing in Switch Manager that has not been applied is lost.
After entering Web Tools, you must re-log in to manage the switch.
You cannot return to EZSwitchSetup Switch Manager unless you close and reopen your browser
window and relaunch EZSwitchSetup.