Brocade Fabric Watch Administrator's Guide Supporting Fabric OS v6.0.0 (53-1000601-01, October 2007)

x Fabric Watch Administrator’s Guide
53-1000601-01
Supported Hardware and Software
This document is specific to Brocade Fabric OS version 6.0.0 and all switches running Fabric OS
version 6.0.0, including:
• Brocade 200E
• Brocade 3250
• Brocade 3850
• Brocade 3900
• Brocade 4100
• Brocade 4900
• Brocade 5000
• Brocade 7500
• Brocade 7600
• Brocade 24000
• Brocade 48000
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for the Brocade Fabric OS v6.0.0, documenting all possible
configurations and scenarios is beyond the scope of this document; however, this document does
specify when procedures or parts of procedures apply only to specific switches.
This document does not support all 5.x Fabric OS versions. This document is specific to Fabric OS
v6.0.0. To obtain information about an OS version other than v6.0.0, see the documentation
specific to that OS version.
What’s New in This Document
The following Information was added:
• Administrative Domains: If the Administrative Domain feature is enabled, the local switch
must be a member of the Administrative Domain, or the following Fabric Watch tools might
not work correctly:
• Fabric Watch commands might not work correctly. By default, AD0 and AD255 have
permanent membership, and so the Fabric Watch commands should work unless you
change the default settings. See the Fabric OS Administrator’s Guide for more
information on the Administrative Domains feature.
• Web Tools Fabric Watch interface will allow view-only access to all threshold
configuration and current values unless the local switch is a member of the current,
enabled Administrative Domain.