Brocade Fabric Watch Administrator's Guide Supporting Fabric OS v6.0.0 (53-1000601-01, October 2007)

Fabric Watch Administrator’s Guide 35
53-1000601-01
Configuring Fabric Watch thresholds
3
Threshold boundary level is setat : Default
DefaultCustom
Unit Percentage(%) Percentage(%)
Time base minuteminute
Low 0 0
High 100 100
BufSize 0 0
Threshold alarmlevel is set at: Default
Errlog-1, SnmpTrap-2, PortLogLock-4
RapiTrap-8, EmailAlert-16
Valid alarm matrix is 31
DefaultCustom
Changed 0 0
Below 0 0
Above 0 0
InBetween 0 0
1 : change behavior type 11 : change threshold alarm level
2 : change behavior interval 12 : change changed alarm
3 : change threshold boundary level 13 : change belowalarm
4 : change custom unit 14 : change abovealarm
5 : change custom timebase 15 : change inBetween alarm
6 : change custom low 16 : apply threshold alarm changes
7 : change custom high 17 : cancel threshold alarm changes
8 : change custom buffer 18 : return to previous page
9 : apply threshold boundary changes
10 : cancel threshold boundary changes
Select choice => : (1..18) [18]7
FIGURE 13 Advanced Configuration menu
NOTE
To ensure that your threshold setting configuration takes effect, remember to change the threshold
boundary level to Custom using option 3, and then apply the threshold boundary level settings using
option 16.
Table 12 describes the event behavior of each element in the Advanced Configuration menu.
The threshold boundary section of the Advanced Configuration menu includes the threshold
information for the selected area. It contains two columns, Default (the default settings column)
and Custom (the custom settings column), and indicates the current setting.
TABLE 12 Element listing information - Advanced Configuration menu
Heading Meaning
Index A numeric identifier assigned to the element
ThresholdName A string identifier assigned to the element
BehaviorType Frequency of alarm notifications
BehaviorInt The element behavior interval, in seconds