Brocade Fabric Watch Administrator's Guide Supporting Fabric OS v6.0.0 (53-1000601-01, October 2007)

Fabric Watch Administrator’s Guide 45
53-1000601-01
Configuring notifications
3
Config Show Menu
____________________________
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : End-to-End Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Resource class
12 : FRU class
13 : Quit
Select an item => : (1..13) [13]
FIGURE 21 Config Show menu
The Config Show menu lists each class for which you can provide a separate e-mail address.
2. Type the number corresponding to the class for which the e-mail configuration should be
displayed.
Fabric Watch displays information such as:
Mail Recipient Information
____________________________________
Email Alert = enabled
Mail Recipient = [e-mail]
The system returns to the main fwMailCfg menu.
Disable e-mail alert
1. Type 2 in the fwMailCfg menu (shown in Figure 20) to disable e-mail alerts for a specific class.
The Config Show menu (shown in Figure 21) displays.
2. Select a class for which Fabric Watch should disable e-mail alerts.
The following confirmation message displays:
Email Alert is disabled!
The system returns to the main fwMailCfg menu.
Enable e-mail alert
1. Type 3 in the fwMailCfg menu (shown in Figure 20) to enable e-mail alert for a specific class.
The Config Show menu (shown in Figure 21) displays.
2. Select a class for which Fabric Watch should enable e-mail alerts.
The following confirmation message displays:
Email Alert is enabled!