HP StorageWorks Fabric OS 5.3.0 Release Notes (AA-RWEYD-TE, July 2007)

Additional password security options
LockoutofAdminusersthatfailauthorization.
Flexible E_Port authentication settings, allowing better interoperability options for fabrics with
varying levels of support. Cer ti cate authentication is now optional.
Auditing of authorization attempts.
FC4–16IP (iSCSI blade)
Support for th
e FC4-16IP iSCSI blade was introd uced with FOS 5.2.1b. This support continues with
FOS 5.3.0.
The FC4-16IP iSCSI blade enables the HP StorageWorks SAN Director 256 to provide iSCSI initiators
to FC target connectivity. Please see the Application Notes for the HP StorageWorks B-Series iSCSI
Director Blade for more information.
Dynamic Host Conguration Protocol (DHCP) support for embe dded swi tches
Beginning with Fabric OS 5.2.1b rmware, DHCP is now supported on the following embedd ed switches:
Brocade 4Gb SAN Switch for HP p-Class BladeSystem
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
With SAN switch for HP c-Class BladeS ystems, DHCP is enabled by default on rev C or later. The status
of DHCP (enabled or disabled) can be observed and changed via either Web Tools or CLI.
Enabling or disabling D HCP
To enable or disable this feature:
1. Loginwiththefollowingdefaultvalues:
•username
admin
•passwordpassword
2. Issue the ipaddrset command.
Using External DHCP to set the Ethernet IP address
NOTE:
This procedure applies to c-Class only.
To set the Ethernet IP address via DHCP:
1. Connect to the active OA via a web browser.
2. Document the DHC P-assigned address by selecting the switch from the GUI Rack Overview window.
3. Verify the IP a ddress using a telnet or ssh login to the switch, or by selecting the switch in the OA
GUI Rack Overview window.
NOTE:
This procedure applies to p-Class only.
The HP p-Class BladeSystem architecture provides Ethernet (iLO) access to embedded SAN switches only
through an external RJ45 connector on the switch; conguration is then similar to tha t for an external
SAN swi
tch.
HP StorageW orks Fabric OS 5.3.0 release notes
7