HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, December 2009)

Fabric OS 6.1.1 administrator guide 207
where:
3. Issue the cfgSave command to save the change to the defined configuration.
switch:admin> alicreate "array1", "2,32; 2,33; 2,34; 4,4"
switch:admin> alicreate "array2", "21:00:00:20:37:0c:66:23; 4,3"
switch:admin> alicreate "loop1", "4,6"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
To add members to an alias:
1. Connect to the switch and log in as admin.
2. Issue the aliAdd command with the following syntax:
aliadd "aliasname", "member[; member...]"
where:
3. Issue the cfgSave command to save the change to the defined configuration.
switch:admin> aliadd "array1", "1,2"
switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51"
switch:admin> aliadd "loop1", "5,6"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
\
To remove members from an alias:
1. Connect to the switch and log in as admin.
2. Issue the aliRemove command with the following syntax:
aliremove "aliasname", "member[; member...]"
aliasname The name of the zone alias to be created.
member A member or list of members to be added to the alias. An alias member
can be specified by one or more of the following methods:
• A domain,port pair.
• Device node or device port WWN
aliasname The name of the zone alias.
member A member or list of members to be added to the alias. An alias member
can be specified by one or more of the following methods:
• A domain,port pair.
• Device node or device port WWN