Instruction Manual

When running IP over FC, these management tools must be run on both the Fibre Channel
host and the switch and must be supported by the Fibre Channel host driver. For a list of
Fib re Channel hosts supported by the 4 Gb SAN Switch, contact your HP representative.
Table 8 4Gb SAN Switc h management features
Manag ement tool
Out-of-band suppor t
In-band support
CLI —Runuptotwoadmin
sessions and four user
sessions simultaneously. For
more information, refer to
the latest version of the HP
Storage Works Fabric OS
administrator guide and
the Fabric OS command
reference guide.
Ethernet or serial connection
IP over FC
Advanced Web Tools —
For inf ormation , refer to
the latest version of the
Fabric OS Web Tools
administrator’s guide.
Ethernet connection
IP over FC
Standard SNMP
applications —For
information, refer to the
latest version of t he Fabric
OS MIB reference guide.
Ethernet connection
IP over FC
Management Server —For
more information, refer to
the latest version of the HP
Storage Works Fabric OS
administrator guide and
the Fabric OS command
reference guide.
Ethernet connection SMI-S compliant
management program
You can connect a m anagement station to one switch via Ethernet while managing other
switches connected to the first switch via FC. To do so, set the FC gateway address of
each of the other switches to be managed to the FC IP ad dress of the first switch.
The gateway address of the first switch should b e set to whatever the gateway address is
for the subnet on which the first switch resides. See Table 9.
42
Managing the 4Gb SAN Switch