Instruction Manual

Firmwa re update

To achieve best performance, HP recommends running the latest ﬁrmware release.

Obtain the most current Fabric OS ﬁrmwar e , conﬁguration ﬁles and MIB ﬁles that support

this switch from the following HP web site:

ttp://www.hp.com/go/storageworks/4 gbswitchforc-classbladesystem

To download ﬁrmwa re from the web to another c omputer (like an FTP server):

NOTE:

Web retrieval procedures may be subject to change .

1. Go to the Suppor t section, located on the far right side of the web page. Click

Software & drivers.

2. Locate the Tasks for Brocade 4 Gb SAN Switch for HP c-C lass BladeSystem section.

3. Click Download drivers and software.

a. Select the applicable switch model.

b. Go to the Se lect O perating System section. Click Cross o perating system (BIOS,

Firmware,Diagnostics,etc.)

c. Scroll down to the ﬁrmware section of the web page and locate the Firmware

table.

d. Locate the latest ﬁrmwar e.

e. Click Downlo ad button>> in the last column and follow the prompts in the

File Download dialog box.

4. To download the code from a n FTP server to the switch, connect an Ethernet cable

from the FTP server to the iLO RJ45 on the active OA.

5. Telnet to the switch and issue firmwaredownload at the command line.

Brocade 4Gb SAN Switch for HP c-Class BladeSystem