User Manual

Fabric OS 5.0.0 procedures user guide 135
To add zones (members) to a zoning configuration:
1. Connect to the switch and log in as admin.
2. Issue the cfgadd command.
3. Issue the cfgsave command to save the change to the defined configuration.
Example:
To remove zones (members) from a zone configuration:
1. Connect to the switch and log in as admin.
2. Issue the cfgremove command.
3. Issue the cfgsave command to save the change to the defined configuration.
Example:
To delete a zone configuration:
1. Connect to the switch and log in as admin.
2. Issue the cfgdelete command.
3. Issue the cfgsave command to save the change to the defined configuration.
Example:
To clear changes to a configuration:
Use the cfgtransabort command. When this command is executed, all changes since the last save
operation (performed with the cfgsave command) are cleared.
In the following example, assume that the removal of a member from zone1 was done in error:
To view all zone configuration information:
1. Connect to the switch and log in as admin.
2. Issue the cfgshow command with no arguments.
switch:admin> cfgadd “newcfg”, “bluezone”
switch:admin> cfgsave
switch:admin> cfgremove “newcfg”, “redzone”
switch:admin> cfgsave
switch:admin> cfgdelete “testcfg”
switch:admin> cfgsave
switch:admin> zoneremove “zone1”,”3,5”
switch:admin> cfgtransabort