User Manual

Fabric OS 5.0.0 procedures user guide 41
To enable telnet:
1. Connect to the switch through a means other than telnet (for example, SSH) and log in as admin.
2. Issue the following command:
configure telnetd
3. In response to the System Services prompt, enter y.
4. In response to the telnetd prompt, enter on.
The telnet interface is enabled.
Blocking listeners
HP StorageWorks switches block Linux® subsystem listener applications that are not used to implement
supported features and capabilities. Table 5 lists the listener applications that HP StorageWorks switches
either block or do not start.