User Manual

Fabric OS 5.0.0 procedures user guide 69
• connUnitPortStatusChange indicates that the status of the sensor associated with the
connectivity unit has changed.
• connUnitPortStatus shows overall protocol status for the port.
• connUnitPortState shows the user-specified state of the port hardware.
Use the snmpmibcapshow command to view the SNMP MIB trap setup. For example:
Configuring secure file copy
Use the configure command to specify that secure file copy (scp) be used for configuration uploads
and downloads. For example:
switch:admin> snmpmibcapshow
FA-MIB: YES
FICON-MIB: YES
HA-MIB: YES
SW-TRAP: YES
swFCPortScn: YES
swEventTrap: YES
swFabricWatchTrap: YES
swTrackChangesTrap: YES
FA-TRAP: YES
SW-EXTTRAP: YES
HA-TRAP: YES
fruStatusChanged: YES
cpStatusChanged: YES
fruHistoryTrap: YES
switch:admin> configure
Not all options will be available on an enabled switch.
To disable the switch, use the “switchDisable” command.
Configure...
System services (yes, y, no, n): [no] n
ssl attributes (yes, y, no, n): [no] n
http attributes (yes, y, no, n): [no] n
snmp attributes (yes, y, no, n): [no] n
rpcd attributes (yes, y, no, n): [no] n
cfgload attributes (yes, y, no, n): [no] y
Enforce secure config Upload/Download (yes, y, no, n): [no] y
switch:admin>