Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

Secure Fabric OS Administrator’s Guide 17

53-1000244-02

9. Select n to input different fabric addresses; or, as shown in the example, select y to continue

with the current fabrics.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

Currently Connected Fabrics

Fabric World Wide Name # Switches Principal

------ ----------------------- ---------- -----------

* 10:00:00:60:69:11:f8:f9 15 sec237

________________________________________________________

Use Currently Connected Fabrics?

y) Yes, continue with current fabric(s)

n) No, input different Fabric addresses(es)

enter your choice> y

10. Enter the file name of the certificate input file and select y.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

LOAD CERTIFICATES

Enter the file-name of the Certificate input file.

File Name ===> c:/6821.xml

Is the filename “c:/6821.xml” correct? (y/n): y

11. Type 1 and press Enter to choose a fabric on which to operate by way of the WWN.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

Choose a Fabric On Which to Operate

Fabric World Wide Name # Switches Principal

------ ----------------------- ---------- -----------

1) 10:00:00:60:69:11:f8:f9 15 sec237

a) All Fabrics

r) Return to Functions menu

enter your choice> 1

12. Once you finish, press Enter to return to the Functions menu.

13. To quit installation, type q to quit the utility; then type y and press Enter to verify that you want

to quit.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

FUNCTIONS

1) Retrieve CSRs from switches & write a CSR file

2) Install Certificates contained in a Certificate file

3) Generate a Licensed-Product/Installed-Certificates report

4) Help using PKI-Cert to get & install certificates

q) Quit PKI Certificate installation utility

Enter choice> q

QUIT? (y/n) y