Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

Secure Fabric OS Administrator’s Guide 19
53-1000244-02
2
4. Type the desired method for entering the fabric addresses.
PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6
Choose a method for providing fabric addresses
1) Manually enter fabric address
2) Read addresses from a file (name to be given)
r) Return to Main menu
Type choice>
To enter the fabric address manually
1. Type 1 and press Enter.
The utility prompts for the IP address or switch name of a switch in the fabric. Only one switch
name or IP address is required for each fabric.
2. Type the IP address or switch name of one of the switches in the fabric and press Enter.
At least one valid IP address must be entered to continue; the corresponding switch must be
operating and available. When all the IP addresses have been entered, press Enter again to
end the list.
PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6
Only one address per fabric is needed to get to all switches.
Enter a list of one or more IP or DNS addresses (aliases) you
wish to use (one per line). End the list with an empty item.
1 --> 10.32.142.167
2 -->
Connecting to Fabric(s) ...
Login to fabric 1. principal switch WWN = 10:00:00:60:69:80:46:00
3. The utility prompts for the username and password for this switch. Type the username and
password; press Enter to continue.
Username: admin
Password:
Logged into fabric 1. principal switch WWN = 10:00:00:60:69:80:46:00
Press Enter to continue >
To read the fabric addresses from a file
1. Type 2 and press Enter.
The utility prompts for the path and file name of the file. The addresses in the file must be IP
addresses or switch names, each on a separate line.