Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

20 Secure Fabric OS Administrator’s Guide

53-1000244-02

2. Type the path and file name of the file that contains the fabric addresses and press Enter.

Enter the file-name of the Fabric Address file.

File Name ===> \\server\Working\FabricAddresses.txt

Connecting to Fabric(s) ...

3. The utility prompts for the username and password for this switch. Type the username and

password; press Enter to continue.

Username: admin

Password:

Logged into fabric 1. principal switch WWN = 10:00:00:60:69:80:46:00

Press Enter to continue >

The utility prompts for the path and file name of the digital certificate file provided by the

switch supplier.

4. Type the path and file name of the digital certificate file and press Enter.

If the returned path and file name is correct, type y and press Enter; if not, type n, press Enter,

retype the path and file name, and verify it is correct.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

LOAD CERTIFICATES

Enter the file-name of the Certificates input file.

File Name ===> \\server\Working\DC_Fabric1.xml

Is the filename "\\server\Working\DC_Fabric1.xml" correct? (y/n): y

The utility prompts for which fabrics to install digital certificates to.

5. Type 1 to distribute certificates only to the fabric identified earlier or a to install certificates to

all discovered fabrics; then press Enter.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

Choose a Fabric On Which to Operate

Fabric World Wide Name # Switches Principal

------ ----------------------- ---------- -----------

1) 10:00:00:60:69:80:46:00 7

....

host1_sw0

a) All Fabrics

r) Return to Functions menu

enter your choice> 1