Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

22 Secure Fabric OS Administrator’s Guide

53-1000244-02

To create a PKI report

1. Type 3:

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

FUNCTIONS

1) Retrieve CSRs from switches & write a CSR file

2) Install Certificates contained in a Certificate file

3) Generate a Licensed-Product/Installed-Certificates report

4) Help using PKI-Cert to get & install certificates

q) Quit PKI Certificate installation utility

Enter choice> 3

2. Type the desired method for entering the fabric addresses; for example, type 1 and press Enter

to manually enter the fabric address.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

Choose a method for providing fabric addresses

1) Manually enter fabric address

2) Read addresses from a file (name to be given)

r) Return to Main menu

Enter choice> 1

The utility prompts for the IP address or switch name of a switch in the fabric. Only one switch

name or IP address is required for each fabric.

3. Type the IP address or switch name of one of the switches in the fabric and press Enter.

At least one valid IP address must be entered to continue, and the corresponding switch must

be operating and available. When all the IP addresses have been entered, press Enter again to

end the list.

PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6

Only one address per fabric is needed to get to all switches.

Enter a list of one or more IP or DNS addresses (aliases) you

wish to use (one per line). End the list with an empty item.

1 --> 192.168.156.73_

The utility prompts for the username and password for this switch.

4. Type the username and password; then press Enter to continue.

Connecting to Fabric(s) ...

Username: root

Password:

Logged into fabric 1. principal switch WWN = 10:00:00:60:69:50:0d:9f

Press Enter to continue >

The utility prompts for information about the report file to be created.