Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

Secure Fabric OS Administrator’s Guide 61
53-1000244-02
4
____________________________________________________
ACTIVE POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
HTTP_POLICY
IpAddr
__________________________________________________
192.155.52.0
192.155.53.1
192.155.54.2
192.155.55.3
____________________________________________________
DISPLAYING INDIVIDUAL SECURE FABRIC OS POLICIES
Use the secPolicyShow command to display information about one or more specified
Secure Fabric OS policies. This command displays information with pagination.
To display information about a specific Secure Fabric OS policy:
1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.
2. Type secpolicyshow “listtype”, “policy_name”.
listtype is the type of Secure Fabric OS policy set. It can be active, defined, or an asterisk (*),
which displays both versions of the specified policy. policy_name is the name of the Secure
Fabric OS policy. If you do not specify a policy name, the command displays all the policies in
the specified policy set.
If you do not specify any operands, the command displays all policies in both the active and
defined policy sets.
For example, to display all the policies in the defined policy set:
primaryfcs:admin> secpolicyshow "defined"
____________________________________________________
DEFINED POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
HTTP_POLICY
IpAddr
__________________________________________________
192.155.52.0
192.155.53.1
192.155.54.2
192.155.55.3
192.155.56.4
____________________________________________________