HP StorageWorks B-series Data Center Fabric Manager Enterprise 10.1.4 Release Notes (5697-0085, July 2009 - includes all 10.1.x versions)

SolutionClosed defect summary
Fixed in DCFM 10.1.0
Workaround—At the server, move the client to the
primary screen and close the client. Download the
remote client again.
Remote client cannot be used when a server has client
viewing on a second screen.
Symptom—Remote client will appear off the screen.
Fixed in DCFM 10.1.0ISLs not showing.
Symptom—If the user moved ISLs between HP
StorageWorks 8/80 SAN Switch and HP
StorageWorks DC SAN Director to HP StorageWorks
4/256 Director so that they are between HP
StorageWorks 8/80 SAN Switch to HP StorageWorks
4/256 Director, and then waited 20 minutes, the
display still shows no ISLs between HP StorageWorks
8/80 SAN Switch and HP StorageWorks 4/256
Director.
Fixed in DCFM 10.1.0The title bar for online help is incorrect.
Fixed in DCFM 10.1.0
Workaround—Use a syslog server that forwards
syslogs using the original message's IP.
Syslog received from forwarder but not showing in
the syslog std or other port.
Symptom—Cannot see Syslog events when
forwarded from a syslog server that does not forward
with the original IP address as the source address.
Fixed in DCFM 10.1.0Sort on port number not working properly. Order is
1, 10, 11, … 19, 2, 20, 21.
Fixed in DCFM 10.1.0Only trunk master ISL is displayed in Connectivity
Properties window.
Fixed in DCFM 10.1.0Timeout issue while saving zones in Interopmode 2.
Symptom—When saving zones to a fabric in
Interopmode 2, the operation may fail with an error
message indicating HTTP timeout.
Fixed in DCFM 10.1.0
Workaround—Use IP address instead of host name
for registering DCFM server as trap recipient.
Traps are not received if host name of the DCFM
server is configured in the switch as trap recipient.
Symptom—User will not receive any events from the
switch.
Fixed in DCFM 10.1.0Master log is filling so quickly with log messages it is
difficult to see errors.
Fixed in DCFM 10.1.0Not getting manageability of M-EOS switches (M6140
and Mi10K).
Fixed in DCFM 10.1.0Accept Change option does not prompt when a switch
is missing from a fabric.
Symptom—Accept Change option does not prompt
the user when a switch is removed from the fabric.
When accepting a fabric change, there is no warning
informing the operator that switches will be dropped.
HP StorageWorks B-series Data Center Fabric Manager Enterprise 27