Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 79

53-1001337-01

cfgDelete

Deletes a zone configuration.

Synopsis cfgdelete "cfgName"

Description Use this command to delete a zone configuration.

This command changes the Defined Configuration (see cfgShow). For the change to become

effective, enable the configuration with the cfgEnable command. For the change to be preserved

across switch reboots, save the configuration to nonvolatile memory with the cfgSave command.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands The following operand is required:

"cfgName" Specify a name for the zone configuration to be deleted, in quotation marks.

Examples To delete a zone configuration:

switch:admin> cfgdelete “USA_cfg”

See Also cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow