Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

112 Fabric OS Command Reference

53-1001337-01

configRemove

Deletes a saved configuration file.

Synopsis configremove -local|-USB|-U [file]

Description This command deletes a configuration file that was previously saved to the local chassis or to an

attached USB device by using the configUpload command.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

-local Removes a configuration file that was previously created by configUpload

-local from the local chassis.

-USB | -U Removes a configuration file that was previously created by configUpload

-USB from an attached USB device. The options -USB and -U are equivalent.

file Specifies the configuration file to be removed. If the -file option is omitted, the

command prompts for a file name.

Examples To remove a configuration file from the local chassis:

switch:admin> configremove -local first_config.txt

To remove a configuration file from an attached USB device without specifying a filename:

switch:admin> configremove -USB

File Name [config.txt]: second_config.txt

See Also configDownload, configUpload, configList, configShow