Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 129

53-1001337-01

configureChassis

Changes chassis-level system configuration settings.

Synopsis configurechassis

Description Use this command to modify chassis-level system configuration settings.

Beginning with Fabric OS v6.2.0, configuration data is grouped into chassis information and switch

information. Each configuration type is managed separately.

Use the configure command to modify switch configuration parameters.

Use the configureChassis command to modify the following chassis configuration parameters:

• cfgload attributes

• Custom Attributes

• System settings

When executed in a Virtual Fabric environment, this command requires chassis permissions. It is

necessary to disable the chassis before configuring the chassis system parameters. In a

non-Virtual Fabric environment, disable the switch before configuring chassis parameters.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

The configureChassis command interactively presents a hierarchical menu. Each top-level heading

and its associated subheadings consist of a text prompt, a selection of valid values, and a default

value (in brackets).

The following keys control the execution of the command:

Return When entered at a prompt with no preceding input, the command accepts the

default value (if applicable) and moves to the next prompt.

Interrupt (Ctrl-C) Aborts the command immediately and ignores all changes made.

End-of-file (Ctrl-D) When entered at a prompt with no preceding input, terminates the command

and saves changes made.

The following parameters can be modified with the configureChassis command:

cfgload Attributes

Table 10 lists the configuration upload and download attributes that may be modified.

TABLE 10 Configurable application attributes

Application Attribute Type Default Range

cfgload Enforce secure Config Upload/Download boolean no no/yes

Enforce signature validation for firmware boolean no no/yes