Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 147
53-1001337-01
cryptoCfg
2
node_WWN Specifies the WWN of the switch or chassis to which the encryption engine
belongs. This operand is optional; if omitted, only the HA cluster name is
defined. You may add EEs separately with the --add -haclustermember
command.
slot_number Specifies the encryption engine slot number on bladed systems.
--delete -hacluster
Deletes the HA cluster with the specified name. This command is valid only
on the group leader. The following operand is required:
HA_cluster_name
Specifies the name of the HA cluster to be deleted.
--add -haclustermember
Adds one or more encryption engine members to an already configured HA. A
maximum of two HA cluster members is currently supported. The EEs must
be part of the same encryption group as the node on which this command is
issued. The encryption engine that is added must have the same media type
(Disk or Tape) containers as the already existing encryption engine in the HA
Cluster. This command is valid only on the group leader. The encryption
engines must belong to different switches or chassis. This rule is enforced by
the CLI to ensure redundancy.
The following operands are required with the --add command:
node_WWN Specifies the node WWN of the switch or chassis to which the encryption
engine belongs.
slot_number Specifies the encryption engine slot number on bladed systems.
--remove -haclustermember
Removes one or both encryption engine members from an already configured
HA cluster. This command is valid only on the group leader. This command
only removes the failover/failback capability for the removed EEs; it does not
affect the relationship between configured CryptoTarget containers and the
encryption engine that is removed from the HA cluster. The containers still
belong to this encryption engine and encryption operations continue.
The following operands are required with the --remove command:
node_WWN Specifies the WWN of the switch or chassis to which the encryption engine
belongs.
slot_number Specifies the encryption engine slot number on bladed systems.
--replace -haclustermember
Replaces an encryption engine, either failed or alive, with an alternate
encryption engine. All target associations for the current encryption engine
are transferred over to the alternate encryption engine when this command is
executed. The alternate encryption engine does not have to be part of the
current HA cluster. The alternate encryption engine must have the same
media type (Disk or Tape) containers configured as the encryption engine
that is replaced. Upon successful replacement, the alternate encryption
engine automatically becomes part of the configured HA cluster and
disrupted peer relationships are repaired. This command is only valid on the
group leader.
The following operands are supported with the --replace command: