Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

152 Fabric OS Command Reference
53-1001337-01
cryptoCfg
2
• Rekey: enabled or disabled
• LUN state: refer to the appendix in the Fabric OS Encryption Administrator’s Guide
• Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
• Key ID state: Re-key
• Key ID: numeric identifier
• Key creation time: date and time of key creation
• Key life (in days); number of days until expiration
• Rekey status: numeric value
• Key expiration time
• Rekey session number: numeric value
• Percentage complete
• Rekey state: Read or write Phase
• Rekey role: primary, alternate
• Block size: numeric value
• Number of blocks: numeric value
• Current logical block address (LBA) being processed
Use the --show -tapepool command to display tape pool configuration parameters for all Tape
pools or for a specific tape pool. For each tape pool, the display includes the following information:
• tape pool Label: user-define label
• Key Life: Life span in minutes
• Encryption mode: encrypt or cleartext
• Encryption format: native or DF compatible
• Configuration status: committed or defined
Use the --show -LUN command for a listing of Crypto LUN status or configuration information for a
specific CTC.
When used with -stat the display includes the following LUN runtime status information:
• Container name: user-defined label
• Type: disk or tape
• EE node: node WWN
• EE slot: EE slot number
• Target: target port WWN and node WWN
• Target PID
• VT: virtual target port WWN and node WWN
• VT PID: virtual target PID
• Number of hosts: numeric value
• Number of rekey (or tape) sessions: numeric value
• For each host:
- Host PWWN, NWWN: host port WWN and node WWN
- VI PWWN, NWWN: virtual initiator port WWN and node WWN