Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

174 Fabric OS Command Reference
53-1001337-01
cryptoCfg
2
FabricAdmin:switch>cryptocfg --commit
Operation Succeeded
4. Display the CTC configuration.
FabricAdmin:switch>cryptocfg --show -container my_disk_tgt -cfg
Container name: my_disk_tgt
Type: disk
EE node: 10:00:00:05:1e:41:9a:7e
EE slot: 0
Target: 20:0c:00:06:2b:0f:72:6d 20:00:00:06:2b:0f:72:6d
VT: 20:00:00:05:1e:41:4e:1d 20:01:00:05:1e:41:4e:1d
Number of host(s): 1
Configuration status: committed
Host: 10:00:00:00:c9:2b:c9:3a 20:00:00:00:c9:2b:c9:3a
VI: 20:02:00:05:1e:41:4e:1d 20:03:00:05:1e:41:4e:1d
Number of LUN(s): 0
Operation Succeeded
5. Discover the LUNs seen by the initiators in the CryptoTarget container.
FabricAdmin:switch>cryptocfg --discoverLUN my_disk_tgt
Container name: my_disk_tgt
Number of LUN(s): 1
Host: 10:00:00:00:c9:2b:c9:3a
LUN number: 0x0
LUN serial number: 200000062B0F726D0C000000
Key ID state: Read write
Key ID: 3a:21:6a:bd:f2:37:d7:ea:6b:73:f6:19:72:89:c6:4f
6. Add a LUN to the CTC with encryption enabled.
FabricAdmin:switch>cryptocfg --add -LUN my_disk_tgt 0 10:00:00:00:c9:2b:c9:3a
20:00:00:00:c9:2b:c9:3a -lunstate cleartext -encrypt
Operation Succeeded
7. Commit the device configuration.
FabricAdmin:switch>cryptocfg --commit
Operation Succeeded
8. Display Crypto LUN runtime status.
FabricAdmin:switch>cryptocfg --show -LUN my_disk_tgt 0 10:00:00:00:c9:2b:c9:3a -stat
Container name: my_disk_tgt
Type: disk
EE node: 10:00:00:05:1e:41:9a:7e
EE slot: 0
Target: 20:0c:00:06:2b:0f:72:6d 20:00:00:06:2b:0f:72:6d
Target PID: 0208d3
VT: 20:00:00:05:1e:41:4e:1d 20:01:00:05:1e:41:4e:1d
VT PID: 012001
Number of host(s): 1
Number of rekey session(s):0
Host: 10:00:00:00:c9:2b:c9:3a 20:00:00:00:c9:2b:c9:3a
Host PID: 010600
VI: 20:02:00:05:1e:41:4e:1d 20:03:00:05:1e:41:4e:1d
VI PID: 012002
Number of LUN(s): 1
LUN number: 0x0
LUN type: disk
LUN serial number: 200000062B0F726D0C000000
Encryption mode: encrypt