Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 175
53-1001337-01
cryptoCfg
2
Encryption format: native
Encrypt existing data: disabled
Rekey: disabled
LUN state: Encryption enabled
Encryption algorithm: AES256-XTS
Key ID state: Read write
Key ID: 3a:21:6a:bd:f2:37:d7:ea:6b:73:f6:19:72:89:c6:4f
Key creation time: Sun Jun 1 20:21:32 2008
Operation Succeeded
9. Display Crypto LUN configuration.
FabricAdmin:switch>cryptocfg --show -LUN my_disk_tgt 0 10:00:00:00:c9:2b:c9:3a -cfg
EE node: 10:00:00:05:1e:41:9a:7e
EE slot: 0
Target: 20:0c:00:06:2b:0f:72:6d 20:00:00:06:2b:0f:72:6d
VT: 20:00:00:05:1e:41:4e:1d 20:01:00:05:1e:41:4e:1d
Number of host(s): 1
Configuration status: committed
Host: 10:00:00:00:c9:2b:c9:3a 20:00:00:00:c9:2b:c9:3a
VI: 20:02:00:05:1e:41:4e:1d 20:03:00:05:1e:41:4e:1d
LUN number: 0x0
LUN type: disk
LUN status: 0
Encryption mode: encrypt
Encryption format: native
Encrypt existing data: disabled
Rekey: disabled
Key ID: not available
Operation Succeeded
10. Display the zone configuration.
Note that a frame redirection zone has been created automatically to route traffic between host,
VT, VI and target, VI, VT.
FabricAdmin:switch>cfgshow
Defined configuration:
cfg: itcfg itzone
cfg: r_e_d_i_r_c__fg
red_1109_brcd200c00062b0f726d200200051e414e1d; red_______base
cfg: testcfg1
testzone1
zone: itzone 10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d
zone: red_1109_brcd200c00062b0f726d200200051e414e1d
10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d;
20:02:00:05:1e:41:4e:1d; 20:00:00:05:1e:41:4e:1d
zone: red_______base
00:00:00:00:00:00:00:01; 00:00:00:00:00:00:00:02;
00:00:00:00:00:00:00:03; 00:00:00:00:00:00:00:04
zone: testzone1
1,0
Effective configuration:
cfg: itcfg
zone: itzone 10:00:00:00:c9:2b:c9:3a
20:0c:00:06:2b:0f:72:6d
F. Device configuration display commands
To display the tape pool configuration: