Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 201

53-1001337-01

errDelimiterSet

Sets the error log start and end delimiters for messages sent to the console and syslog.

Synopsis errdelimiterset [-s "start delimiter string"][-e "end delimiter string"]

Description Use this command to set the error log start and end delimiters for log messages sent to the console

and syslog. An empty string clears the start and the end delimiters (including the colon) so that they

are not displayed.

If no arguments are supplied to the command, it instead displays the existing errDelimiterSet

configuration. These delimiters are stored persistently.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

-s "start delimiter string"

Specify the alphanumeric string for the start delimiter; up to 10 characters

are allowed. This operand is optional.

-e "end delimiter string"

Specify the alphanumeric string for the end delimiter; up to 10 characters are

allowed. This operand is optional.

Examples To display the start and end delimiters:

switch:admin> errdelimiterset

delimiter start string: <none>

delimiter end string: <none>

To change the start and end delimiters (with sample output):

switch:admin> errdelimiterset -s "Start" -e "End"

Start2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name Server

received an invalid request from device 10:02:32:A3:78:23:23:End