Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 221
53-1001337-01
fabSwitchShow
2
fabSwitchShow
Displays the fabric switch state structure information.
Synopsis fabswitchshow
Description Use this command to display the fabric switch state structure information. This command is strictly
for debugging; it is not intended as a user command.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display fabric switch state structure:
switch:admin> fabswitchshow
Fabric Switch State Structure Information
=========================================
State: D0
Stage: warm done
Rdi Receive Timer: 0x10069400, IDLE STATE
Unconfirmed Sw Timer: 0x10069508, IDLE STATE
NTP Timer: 0x100695b8, IDLE STATE
ME Timer: 0x10069610, IDLE STATE
Principal Domain: 2
Upstream Port: 64
Principal Wwn: 10:00:00:60:69:80:06:ce
Principal Priority: 0x2
Flags: 0x40
me retry count: 0
inq_sem count: 1
dbg_sem count: 1
ha efp count: 0
fab_q current count: 0
fab_q high water: 8
fab_q age: 0 (sec)
dup xid occurrence: 0
iu nodes outstanding: 0
EFP update port: 2
FWN frames pending 0
test check point: No check point set
fabric license: TRUE
fabric EFP version: 7
last message:
20:30:29.826 *Snd inquiry (4) D0,NA D0,NA NA NA
(output truncated)
See Also supportShow