Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 243
53-1001337-01
fcPing
2
--pattern pattern Specifies up to 16 "pad" bytes, which are used to fill out the request frame
payload sent. This is useful for diagnosing data-dependent problems in the
fabric link. The pattern bytes are specified as hexadecimal characters. For
example, --pattern ff fills the request frame with instances of the number 1.
If a non-byte aligned pattern is specified, the upper nibble of the last pattern
byte is filled with zeros. For example, --pattern 123 fills the payload with a
pattern of 0x1203.
--bypasszone Bypasses the zone check.
--quiet Suppresses the diagnostic output. Only zoning information, if applicable, and
the summary line are displayed.
source Specifies the source port ID, port WWN, or node WWN. This operand is
optional.
destination Specifies the destination. When using fcPing between a source and a
destination, specify the destination as a port WWN or a node WWN. When
using fcPing to ping a single device, specify the destination as a switch WWN,
a domain ID, or a switch domain controller ID.
--help Displays the command usage.
Examples To display one device that accepts the request and another device that rejects the request:
switch:admin> fcping 10:00:00:00:c9:29:0e:c4 21:00:00:20:37:25:ad:05
Source: 10:00:00:00:c9:29:0e:c4
Destination: 21:00:00:20:37:25:ad:05
Zone Check: Not Zoned
Pinging 10:00:00:00:c9:29:0e:c4 [0x20800] with 12 bytes of data:
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1162 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1013 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1442 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1052 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1012 usec
5 frames sent, 5 frames received, 0 frames rejected, 0 frames timeout
Round-trip min/avg/max = 1012/1136/1442 usec
Pinging 21:00:00:20:37:25:ad:05 [0x211e8] with 12 bytes of data:
Request rejected
Request rejected
Request rejected
Request rejected
Request rejected
5 frames sent, 0 frames received, 5 frames rejected, 0 frames timeout
Round-trip min/avg/max = 0/0/0 usec
To display one device that accepts the request and another device that does not respond to the
request:
switch:admin> fcping 0x020800 22:00:00:04:cf:75:63:85
Source: 0x20800
Destination: 22:00:00:04:cf:75:63:85
Zone Check: Zoned
Pinging 0x20800 with 12 bytes of data:
received reply from 0x20800: 12 bytes time:1159 usec
received reply from 0x20800: 12 bytes time:1006 usec