Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 249

53-1001337-01

fcpLogShow

Displays the FCPD debug information log (debug command).

Synopsis fcplogshow

Description Use this command to display the debug information logged at various stages during the Fibre

Channel Protocol daemon (FCPD) device probing.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display the FCPD debug information log:

switch:admin> fcplogshow

Time Stamp Event Port file&lineno arg0 arg1 arg2 arg3 arg4

===============================================================================

08:20:12.274 FlshOrProbe 0 1 536 2 :0 :0 :0 :0

08:20:12.275 ProbeFlsh 0 1 3031 0 :0 :0 :0 :0

08:20:12.275 FlshOrProbe 1 1 536 2 :0 :0 :0 :0

08:20:12.275 ProbeFlsh 1 1 3031 0 :0 :0 :0 :0

08:20:12.275 FlshOrProbe 2 1 536 2 :0 :0 :0 :0

08:20:12.275 ProbeFlsh 2 1 3031 0 :0 :0 :0 :0

08:20:12.275 FlshOrProbe 3 1 536 2 :0 :0 :0 :0

08:20:12.275 ProbeFlsh 3 1 3031 0 :0 :0 :0 :0

08:20:12.275 FlshOrProbe 4 1 536 2 :0 :0 :0 :0

[output truncated]

See Also fcpLogClear, fcpLogDisable, fcpLogEnable