Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

250 Fabric OS Command Reference

53-1001337-01

fcpProbeShow

Displays the Fibre Channel Protocol (FCP) probe information.

Synopsis fcpprobeshow [slotnumber/]portnumber

Description Use this command to display the Fibre Channel Protocol daemon (FCPD) device probing

information for the devices attached to the specified F_Port or FL_Port. This information includes

the number of successful logins and SCSI INQUIRY commands sent over this port and a list of the

attached devices.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

slotnumber For bladed systems only, specify the slot number of the port to display,

followed by a slash (/).

portnumber Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports. This operand is required.

Examples To display the FCP probe information:

switch:admin> fcpprobeshow 4/4

port 52 is L-Port and it is online.

nodes probed: 2

successful PLOGIs: 2

successful PRLIs: 2

successful INQUIRies: 2

successful LOGOs: 2

outstanding IUs: 0

probing state: 3

probing TOV: 0

probing count: 0

probing next: 0

pmap: 0x00000000, 0x00000000, 0x00000000, 0x00000010

update map: 0x00000000, 0x00000000, 0x00000000, 0x00000010

list of devices(may include old devices on the loop):

0x2b4e2: IBM DDYF-T09170R F60N

0x2b4e4: IBM DDYF-T09170R F60N