Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

266 Fabric OS Command Reference
53-1001337-01
fcrLsanMatrix
2
Examples For the following example, assume that the backbone has the following online edge fabrics (FIDs):
1, 2, 4, 5, 7, 8, 10 (currently, 14, 19 are not available). To add the LSAN Zone Matrix data:
switch:admin > fcrlsanmatrix --add 4 5
switch:admin > fcrlsanmatrix --add 4 7
switch:admin > fcrlsanmatrix --add 10 14
switch:admin > fcrlsanmatrix --add 10 19
To remove an entry:
switch:admin > fcrlsanmatrix --remove 10 14
To display the information from the cache:
switch:admin > fcrlsanmatrix --display
Fabric ID 1 Fabric ID 2
------------------------------------
4 5
4 7
10 19
To apply the changes persistently:
switch:admin > fcrlsanmatrix --apply -lsan
To view the persistent changes:
switch:admin > fcrlsanmatrix -lsan
LSAN MATRIX is activated
Fabric ID 1 Fabric ID 2
--------------------------------------
4 5
4 7
10 19
To view the LSAN Zone static and default/dynamic binding in the backbone where online fabrics
are: 1, 2, 4, 5, 7, 8, 10:
switch:admin > fcrlsanmatrix --fabricview -lsan
LSAN MATRIX is activated
Fabric ID 1 Fabric ID 2
--------------------------------------
4 5
4 7
10 19
Default LSAN Matrix:
1 2 8
To display all proxy devices for all FC Routers in the same backbone fabric whether or not they are
relevant to this FC Router:
switch:admin > fcrproxydevshow -a
Proxy WWN Proxy Device Physical State
Created PID Exists PID
in Fabric in Fabric
52 10:00:00:06:2b:0e:4d:e5 01f001 78 4e0000 Imported