Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 325

53-1001337-01

fwAlarmsFilterSet

Enables or disables alarms for Fabric Watch.

Synopsis fwalarmsfilterset [mode]

Description Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all

non-environment class alarms are suppressed. By turning on the alarms, all class alarms are

generated.

Notes This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operand:

mode Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is

specified, the default value is 0 (alarms deactivated). This operand is

optional.

Examples To enable alarms in Fabric Watch:

switch:admin> fwalarmsfilterset

FW: Alarms are already disabled

switch:admin> fwalarmsfilterset 1

FW: Alarms are already enabled