Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

386 Fabric OS Command Reference

53-1001337-01

iodDelayReset

Resets the user-defined IOD delay settings to default values.

Synopsis ioddelayreset domain_id

Description Use this command to reset the user-defined IOD delay settings to default values (-1). This

command resets IOD delay values for a specified domain ID that was previously configured with the

iodDelaySet command.

The switch must be disabled before IOD delay can be reset.

Notes The iodDelaySet command is deprecated in Fabric OS v6.2.0. The iodDelayReset command is

retained for legacy reasons only. If you have configured IOD delay settings previously, you must

reset the IOD settings to defaults before upgrading to v6.2.0. Use iodDelayShow to determine

current settings.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A,

"Command Availability" for details.

Operands none

Examples To reset IOD delay to default values for domain 10:

switch:admin> ioddelayreset 10