Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 387

53-1001337-01

iodDelayShow

Displays the user-defined IOD delay settings for specified domains.

Synopsis ioddelayshow [ domain_id ]

Description Use this command to display the user-defined IOD delay settings for all domains in the fabric or for

a specified domain ID. This command only displays delay values for domain IDs, for which the IOD

delay parameter has been previously set with the iodDelaySet command. The command does not

display defaults values.

Note The iodDelaySet command is deprecated in Fabric OS v6.2.0. The iodDelayReset command is

retained for legacy reasons only. If you have configured IOD delay settings previously, you must

reset the IOD settings to defaults before upgrading to v6.2.0. Use iodDelayShow to determine

current settings.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A,

"Command Availability" for details.

Operands The following operand is optional:

domain_id Specifies the domain ID for which to display the IOD delay setting. If this

operand is omitted, the command displays the IOD delay settings for all

domains in the fabric.

Examples To Display the IOD delay setting for domain 5:

switch:user> ioddelayshow 5

Domain - Iod Delay

5 - 20

To display IOD settings for all domains in the fabric:

switch:user> ioddelayshow 5

Domain - Iod Delay (ms)

1 - 2

5 - 20

10 - 20

20 - 30

21 - 23