Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 451

53-1001337-01

licenseIdShow

Displays the system license ID.

Synopsis licenseidshow

Description Use this command to display the license ID of the system.

Some features of the switch and the fabric are optional, licensed products. Without a license

installed for such products, the services provided by these features are not available.

This command displays the system license ID used for generating and validating licenses on the

system. The license ID format consists of eight pairs of hexadecimal values, separated by colons.

Each hexadecimal value is between 00 (0) and FF (255).

Notes While the format of this identifier might be similar or even identical to other identifiers in the

system, no inferences should be made about the relationships between them as they are subject to

change independently of one another.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display the license ID:

switch:admin> licenseidshow

a4:f8:69:33:22:00:ea:18

See Also licenseAdd, licenseHelp, licensePort, licenseRemove, licenseShow, licenseSlotCfg