Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 21
53-1001337-01
ag
2
ag
Enables Access Gateway (AG) and manages AG-specific operations.
Synopsis ag --help
ag --show
ag --modeshow | --modeenable |--modedisable
ag [--policyenable | --policydisable] policy
ag --policyshow
ag --mapshow [N_Port]
ag [--mapset | --mapadd |--mapdel] N_Port [F_Port1; F_Port2;...]
ag --pgshow [pgid]
ag --pgcreate- pgid “N_Port1 [;N_Port2;...]” [-n pgname] [-m "lb; mfnm”]
ag [--pgadd | --pgdel] pgid “N_Port1 [; N_Port2;...]”
ag --pgrename pgid newname
ag --pgremove pgid
ag
[--pgmapadd | --pgmapdel] pgid “F_Port1 [; F_Port2;...]”
ag [ --pgsetmodes | pgdelmodes ] pgid "mfnm;lb"
ag ---pgfnmtov [new_tov]
ag [--failoverenable | --failoverdisable] N_Port | -pg pgid]
ag --failovershow [N_Port]
ag [--failbackenable | --failbackdisable] [ N_Port | | -pg pgid]
ag --failbackshow [N_Port]
ag [--prefset | --prefdel ] "F_Port [;F_Port2;...]" N_Port
ag --prefshow
ag [--adsset | --adsadd | --adsdel] "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
ag --adsshow
ag --persistentalpaenable 1 | 0 mode
ag --printalpamap F_Port
ag --deletepwwnfromdb PWWN
ag --clearalpamap F_Port
Description Use this command to perform the following Access Gateway management functions:
• Enable or disable Access Gateway mode.
• Display current configuration and state of AG.
• Configure and display F_Port to N_Port mapping.
• Configure and display N_Port failover and failback policies.