Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 485

53-1001337-01

msPlClearDB

Clears the Management Server (MS) platform database on all switches in the fabric.

Synopsis msplcleardb

Description Use this command to clear the MS platform database in the entire fabric. Because this operation

cannot be undone, it should not be performed unless it is intended to resolve a database conflict

between two joining fabrics or to establish an entirely new fabric with an empty database.

Notes When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

This command is supported only in AD0 and AD255 contexts.

Operands none

Examples To clear the MS platform database:

switch:admin> msplcleardb

MS Platform Service is currently enabled.

This will erase MS Platform Service Database in the entire fabric.

Would you like to continue this operation? (yes, y, no, n): [no] y

Request to MS Platform DB Clear operation in progress.....

*Completed clearing MS Platform Service Database!!

See Also msCapabilityShow, msConfigure, msPlatShow, msPlatShowDBCB, msPlMgmtActivate,

msPlMgmtDeactivate