Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

600 Fabric OS Command Reference
53-1001337-01
portCfgAutoDisable
2
To enable the auto disable feature on a port range.
switch:admin> portcfgautodisable --enable 0-8
To enable the auto disable feature on a range of ports, some of which were previously enabled. The
following example enables port 4.
switch:admin> portcfgautodisable --enable 2-4
Same configuration for port 2
Same configuration for port 3
To disable the auto disable feature on a port range.
switch:admin> portcfgautodisable --disable 0-8
See Also portCfgShow, portEnable
: