Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 601

53-1001337-01

portCfgCreditRecovery

Enables or disables credit recovery on a port.

Synopsis portcfgcreditrecovery --disable | --enable [slot/]port

Description Use this command to enable or disable credit recovery on a port.

The credit recovery feature enables credits or frames to be recovered. Only ports configured as

long distance ports can utilize the credit recovery feature. The default credit recovery configuration

is enabled.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

The Fabric OS port configuration commands are not supported on FCoE ports. Use fcoe --cfg to

configure FCoE ports.

Operands This command has the following operands:

--disable Disables credit recovery configuration on the specified port.

--enable Enables credit recovery configuration on the specified port.

--help Displays the command usage.

Examples To enable credit recovery on a port:

switch:admin> portcfgcreditrecovery --enable 3/15

To disable credit recovery on a port:

portcfgcreditrecovery --disable 3/15