Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

626 Fabric OS Command Reference
53-1001337-01
PortCfgQos
2
configuration. For example if the rate limit is set at 4 Gbps and the port
comes online only at 2 Gbps, no enforcement is needed. Specify an ingress
rate in Mbps. Supported values for ratelimit are: 200, 400, 600, 800, 1000,
1500, 2000, 2500, 3000, 3500, 4000, 5000, 6000, 7000, and 8000.
--help Displays the command usage.
Examples To enable QoS on a port.
switch:admin> portcfgqos --enable 3/15
To disable QoS on a port.
switch:admin> portcfgqos --disable 3/15
To set the ingress rate limit on a port to 2 Gbps:
switch:admin> portcfgqos --setratelimit 3/15 2000
To set the default QoS configuration on a port:
switch:admin> portcfgqos --default 3/15
See Also portCfg, portCmd, portShow, switchShow, configure
: