Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

648 Fabric OS Command Reference

53-1001337-01

portDebug

Sets debug level and verbose level of port modules.

Synopsis portdebug dbg_lvl, vbs_lvl

Description Use this command to set the debug level and verbose level of port modules.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

dbg_lvl Specify the debug level to be set for port modules; valid values are 1 to 5.

vbs_lvl Specify the verbose level to be set for port modules; valid values are 1 to 5.

Examples To set debug level and verbose level of port modules:

switch:admin> portdebug 3 4