Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 43

53-1001337-01

aliDelete

Deletes a zone alias.

Synopsis alidelete “aliName”

Description Use this command to delete a zone alias.

This command changes the defined configuration. For the change to become effective, enable the

zone configuration with the cfgEnable command. For the change to be preserved across switch

reboots, save the zone configuration to nonvolatile memory with the cfgSave command.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands The following operand is required:

“aliName” Specify the name of the zone alias to be deleted. This operand must be

enclosed in quotation marks.

Examples To delete the zone alias “array2”:

switch:admin> alidelete "array2"

See Also aliAdd, aliCreate, aliRemove, aliShow