Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

700 Fabric OS Command Reference
53-1001337-01
portShow
2
-itn Displays data at the Initiator Target nexus (SID/DID) level.
-itl Displays data at the Initiator Target LUN (SID/DID/LUN) level.
-twb Displays data at the Exchange (SID/DID/LUN/Exchange) level.
command Specifies the type of information to be displayed. This operand is optional; if
omitted, the default (-stats) is used. You may specify more than one
command option. Valid commands include:
-stats Displays FCP emulation statistics. This is the default display.
-info Displays general FCP emulation information.
-cfg Displays the FCP emulation configuration.
-dump Displays a raw data dump including data for all information types.
param Limits output to one or more of the following parameters, given the
commands and levels specified with this command. This operand is optional;
if omitted, output for all parameters is displayed. There is no default
parameter.
-sid SID Displays output for the specified SID only.
-did DID Displays output for the specified DID only.
-lun LUN Displays output for the specified LUN only.
-timer Displays timer information only.
options Affects all levels and commands globally. Only one option is supported.
-zero Displays zero-valued statistics. Note that some commands may show
zero-valued information regardless of whether or not this option is
specified.
-ficon Displays sub-menu for FICON emulation display commands. The syntax for
-ficon is as follows:
portshow xtun [slot/]ve_port -ficon [command] [options]
The following optional commands are supported with -ficon; if omitted, the
usage for all parameters is displayed.
-help Displays the command usage.
-stats Displays FICON statistics.
-fdpb adrs Displays FICON ports or a specific FICON Device Path Block.
-fchb adrs Displays FICON logical partitions (LPARs) or a specific FICON Channel
Control Block.
-fcub adrs Displays FICON images (the same output as with -images) or a specific
FICON Control Unit Block.
-images Displays FICON images.
-fdcb adrs Displays FICON devices or specific FICON Device Control Block.
-tapeperf Displays the emulated tape performance. When issued with
-clear, this
command starts the emulated XRC performance monitor.