Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 701
53-1001337-01
portShow
2
-xrcperf Displays the emulated XRC Performance. When issued with -clear, this
command starts the emulated XRC performance monitor.
-structs Displays FICON control block sizes.
-emul Displays the current FICON emulation statistics.
-act Displays the current Active Exchange information.
options The following additional option is supported.
-clear Resets the specified statistics. This operand is optional; it requires a
preceding command.
-mem adrs length
Specifies the SE memory length in words to display. The valid range for length
is 0-1024.
-dram2 Display the current usage of the dynamic memory allocator.
-pools Display the current free pool allocation (FPA) buffer usage.
-tcb Displays tunnel statistics.
-drshow Displays the current Descriptor Ring status
-smem Displays the current Shadow Memory data.
-rte Displays the current Routing Info SE memory.
Examples To display FCIP tunnel configuration parameters on the Brocade 7800:
switch:admin> portshow fciptunnel 16
-------------------------------------------
Tunnel ID: 16
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: On (Standard)
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:54:b0:ba
Peer WWN: 10:00:00:05:1e:54:b1:12
Circuit Count: 4
Flags: 0x00000000
FICON: On
FICON XRC: Off
FICON Tape Write: On
FICON Tape Read: On
FICON TinTir Emul: On
FICON Dvc Acking: On
FICON Read BLK-ID: Off
Tape Write Pipe: 32
Tape Read Pipe: 32
Tape Write Devs: 16
Tape Read Devs: 16
Tape Write Timer: 300
Tape Max Chain: 3000000
FICON OXID Base: 0x8000
FICON Debug Flags: 0xf7c80000