Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 711
53-1001337-01
portShow
2
041055B680 D 0x106301640106**** 0x0004 0x0000 0x0000
switch:admin> portshow xtun 16 -ficon -fchb 041055B680
FCHB (FICON CHannel Block - one per LPAR) Count = 1
---------------------------------------------------------------
(0x) Side Path: CU Count Emul ChTIN CuTIN
=========== ==== ================== ======== ========== ======
041055B680 D 0x106301640106**** 0x0004 0x0000 0x0000
FCHB Flags:
tinInProgress=N emuTinAckPending=N emuTirInProgress=N
emuTirAckPending=N emuTinLackPending=N emuTirPending=N
emuTirReceived=N emuTinFinalAckPend=N emuTirPending=N
emuTinSuccessful=N emuTinReceived=N emuTirSent=N
fcrPresent=N fchbValid=Y
FCHB Control variables:
tinOrigOxid=0xFFFF tirOrigOxid=0xFFFF tinAckRxid=0xFFFF
tinAckOxid=0xFFFF allocChOxid=0xFFFF allocChOIdx=0x0000
tinTirOxid=0xFFFF
To reset the Device Path Block statistics:
switch:admin> portshow xtun 16 -ficon -fdpb -clear
Function Commands supported only on the Brocade 7500/7500E and FR4-18i.
Synopsis portshow option [slot/]ge_port [all| tunnel_id ] [arguments]
Description Use this command to display configuration parameters and status information for FCIP tunnels on
the Brocade 7500/7500E FC Router switch and on the FR4-18i FC Router blade. The following
display options are supported only on these platforms:
• portShow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnel configuration settings
including the following:
- Additional performance parameters
- FC data path credit data
- Connection parameter information
- IKE and IPSec policy information on IPSec-enabled tunnels
- VC to FCIP QoS mapping table
- FCIP TCP Byte Stream Statistics on Byte Stream-enabled tunnels
- History of TCP connections
- SnapShow capture of TCP statistics between two points in time
• portShow iscsi - Displays iSCSI configuration information
• portShow mode- Displays Port Mode information
• portShow ficon - Displays FICON parameters on FICON configured tunnels
• portShow vlantag - Displays VLAN tag configuration
• portShow inbandmgmt - Displays Inband management configuration (Brocade 7500 only)