Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)
Fabric OS Command Reference 715
53-1001337-01
portShow
2
-active Displays active FDCBs.
-epcb Displays Emulation Control Block (port specific).
-fhpb Displays FICON Host Path Block.
-fdpb adrs Displays FICON Device Path Block.
-fchb Displays FICON Channel Control Block.
-fcub Displays FICON Control Unit Control Block.
-fdcb adrs Displays FICON Device Control Block.
-mem adrs Displays memory in 256 byte increments: ! for next.
-pools Displays current data buffer pool counts.
-pmmr Displays PMMR pointers.
-fastw Displays the FastWrite queue.
-clear Clears post display statistics; requires a preceding argument.
vlantag Displays VLAN tag configuration settings.
inbandmgmt Displays the status of the inband management configuration and IP
addresses configured to enable inband management on the Brocade 7500
through GbE port interfaces. This command requires a port to be specified
and displays the IP addresses for that port. In addition the output shows
whether inband management is enabled or disabled. To display the routing
table, use the portshow iproute command.
Examples To display iSCSI Port WWN and Sessions:
switch:admin> portshow iscsi 2/ge0
GE Port 2/ge0
Port WWN Sessions
-----------------------------------
50:06:06:9e:40:09:a2:00 0
To display the connection parameter information for all FCIP tunnels on the switch and to show the
current DiffServ markings being used for data connection as well as control connection (The
following example displays high water marks in bold for the data and control TCP connections of
Tunnel 0):
switch:admin> portshow fciptunnel -all -params
Port: ge0
-------------------------------------------
Tunnel ID 0
Tunnel Description "This is a test Description of this tunnel"
Remote IP Addr 192.168.10.2
Local IP Addr 192.168.44.9
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:38:84:65
Compression off
Fastwrite off
Tape Pipelining off
Committed Rate 900000 Kbps (0.900000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8