Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 725
53-1001337-01
portStats64Show
2
portStats64Show
Displays the 64-bit hardware statistics for a port.
Synopsis portstats64show [slotnumber/]portnumber
Description Use this command to display the following hardware statistics for a port. Two integers are reported
for most values. In such cases, the top word is the most significant.
stat64_wtx Number of 4-byte words transmitted.
stat64_wrx Number of 4-byte words received.
stat64_ftx Number of frames transmitted.
stat64_frx Number of frames received.
stat64_c2_frx Number of class 2 frames received.
stat64_c3_frx Number of class 3 frames received.
stat64_lc_rx Number of link control frames received.
stat64_mc_rx Number of multicast frames received.
stat64_mc_to Number of multicast timeouts.
stat64_mc_tx Number of multicast frames transmitted.
tim64_rdy_pri Number of times R_RDY was high priority.
tim64_txcrd_z Number of times that the TX BB_credit was at zero.
er64_enc_in Number of encoding errors inside of frames.
er64_crc Number of frames with CRC errors.
er64_trunc Number of frames shorter than minimum.
er64_toolong Number of frames longer than maximum.
er_bad_eof Number of frames with bad end-of-frame.
er64_enc_out Number of encoding error outside of frames.
er64_disc_c3 Number of class 3 frames discarded.
stat64_rateTxFrame
Tx frame rate (frames/second).
stat64_rateRxFrame
Rx frame rate (frames/second).
stat64_rateTxPeakFrame
Tx peak frame rate (frames/second).
stat64_rateRxPeakFrame
Rx peak frame rate (frames/seconds).
stat64_rateTxByte Tx Byte rate (Bps).
stat64_rateRxByte Rx Byte rate (Bps).
stat64_rateTxPeakByte
Tx peak Byte rate (Bps).