Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

728 Fabric OS Command Reference

53-1001337-01

portStatsClear

Clears the hardware statistics of a port.

Synopsis portstatsclear [slot/]port

Description Use this command to clear the hardware statistics for a specified port. This command also clears

the hardware statistics for the associated three ports in the target port's quad, including

ALPA-based CRC monitor, End-to-End monitor, and Filter-based performance monitor statistics.

interswitch link (ISL) monitor statistics are not cleared by this command.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

slot For bladed systems only, specify the slot number of the port to be cleared,

followed by a slash (/).

port Specify a port number to be cleared, relative to its slot for bladed systems.

Use switchShow to display a list of valid ports.

Examples To clear hardware statistics for a port:

switch:admin> portstatsclear 4/15