Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

736 Fabric OS Command Reference

53-1001337-01

portSwapDisable

Disables the portswap feature.

Synopsis portswapdisable

Description Use this command to disable the portswap feature. The portSwap command cannot be used after

this feature is disabled.

The disabled state of the portswap feature is persistent across reboots and power cycles.

Enabling or disabling the portswap feature does not affect previously performed portswap

operations.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To disable the portswap feature:

switch:admin> portswapdisable

See Also portSwap, portDisable, portEnable, portShow, portSwapEnable, portSwapShow, switchShow