Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 737

53-1001337-01

portSwapEnable

Enables the portswap feature.

Synopsis portswapenable

Description Use this command to enable the portswap feature. The portSwap command cannot be used unless

the feature is first enabled with this command.

The enabled state of the portswap feature is persistent across reboots and power cycles.

Enabling or disabling the portswap feature does not affect previously performed portswap

operations.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To enable the portswap feature:

switch:admin> portswapenable

See Also portSwap, portDisable, portEnable, portShow, portSwapDisable, portSwapShow, switchShow